UNS C65100 (CW115C) Silicon Bronze
C65100 bronze is a bronze formulated for primary forming into wrought products. CW115C is the EN numeric designation for this material. C65100 is the UNS number. Additionally, the EN chemical designation is CuSi1. And the common industry name is Low-Silicon Bronze B.
It has the lowest embodied energy and can have a moderately low tensile strength among wrought bronzes.
The properties of C65100 bronze include nine common variations. This page shows summary ranges across all of them. For more specific values, follow the links immediately below. The graph bars on the material properties cards further below compare C65100 bronze to: wrought bronzes (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it’s 50% of the highest, and so on.
Solids: 3/8″ to 2″ O.D.
Hex: 3/8″ to 2″ O.D.
Standard lengths: 144″
Kegunaan biasa
Electrical: conduit, motor (rotor bars), pole line hardware
Fasteners: bolts, cable clamps, cap screws, fasteners, machine screws, nuts, rivets, screws, u bolts
Industrial: heat exchanger tube, hydraulic pressure lines, oil refinery plumbing tube, welding rod
Marine: hardware
Spesifikasi yang serupa atau setara
| CDA | ASTM | SAE | AMS | Persekutuan | tentera | Lain-lain |
|---|---|---|---|---|---|---|
| C65100 | B98 B98M |
Komposisi kimia
| Cu% 1 | Pb% | Zn% | Fe% | Mn% | Dan% | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Nilai 1Cu termasuk Ag. Nota: Cu + jumlah unsur bernama, 99.5% min. Nilai tunggal mewakili maksimum. | |||||||||||
| Rem. | 0.05 | 1.50 | 0.80 | 0.70 | 0.80- 2.00 | ||||||
Kebolehmesinan
| Aloi tembaga UNS No. | Penilaian kebolehmesinan | Ketumpatan (lb/in3 pada 68 °F) |
|---|---|---|
| C65100 | 30 | 0.316 |
Sifat mekanikal
C65100
H02 separuh keras
Size range: up to 1/2″ rod inclusive
| Kekuatan tegangan, min | Yield strength, at 0.5% extension under load,, min | Elongation, in 2 in. or 50 mm min | Kekerasan Rockwell "B". | Teguran | ||
|---|---|---|---|---|---|---|
| ksi | MPa | ksi | MPa | % | min hingga maksimum HRB | |
| 55 | 380 | 20 | 140 | 11 | 60-85 | |
Size range: over 1/2″ to 2″ rod inclusive
| Kekuatan tegangan, min | Yield strength, at 0.5% extension under load,, min | Elongation, in 2 in. or 50 mm min | Kekerasan Rockwell "B". | Teguran | ||
|---|---|---|---|---|---|---|
| ksi | MPa | ksi | MPa | % | min hingga maksimum HRB | |
| 55 | 380 | 20 | 140 | 12 | 60-85 | |
C65100
H04 keras
Size range: up to 1/2″ rod inclusive
| Kekuatan tegangan, min | Yield strength, at 0.5% extension under load,, min | Elongation, in 2 in. or 50 mm min | Kekerasan Rockwell "B". | Teguran | ||
|---|---|---|---|---|---|---|
| ksi | MPa | ksi | MPa | % | min hingga maksimum HRB | |
| 65 | 450 | 35 | 241 | 8 | 65-90 | |
Size range: over 1/2″ to 2″ rod inclusive
| Kekuatan tegangan, min | Yield strength, at 0.5% extension under load,, min | Elongation, in 2 in. or 50 mm min | Kekerasan Rockwell "B". | Teguran | ||
|---|---|---|---|---|---|---|
| ksi | MPa | ksi | MPa | % | min hingga maksimum HRB | |
| 65 | 450 | 35 | 241 | 10 | 65-90 | |
C65100
H06 extra hard
Size range: up to 1/2″ rod inclusive
| Kekuatan tegangan, min | Yield strength, at 0.5% extension under load,, min | Elongation, in 2 in. or 50 mm min | Kekerasan Rockwell "B". | Teguran | ||
|---|---|---|---|---|---|---|
| ksi | MPa | ksi | MPa | % | min hingga maksimum HRB | |
| 85 | 585 | 55 | 380 | 6 | 75-95 | |
Size range: over 1/2″ to 1″ rod inclusive
| Kekuatan tegangan, min | Yield strength, at 0.5% extension under load,, min | Elongation, in 2 in. or 50 mm min | Kekerasan Rockwell "B". | Teguran | ||
|---|---|---|---|---|---|---|
| ksi | MPa | ksi | MPa | % | min hingga maksimum HRB | |
| 75 | 515 | 45 | 310 | 8 | 75-95 | |
Size range: over 1″ to 1 1/2″ rod inclusive
| Kekuatan tegangan, min | Yield strength, at 0.5% extension under load,, min | Elongation, in 2 in. or 50 mm min | Kekerasan Rockwell "B". | Teguran | ||
|---|---|---|---|---|---|---|
| ksi | MPa | ksi | MPa | % | min hingga maksimum HRB | |
| 75 | 515 | 40 | 275 | 8 | 75-95 | |
Sifat fizikal
Sifat fizikal yang disediakan oleh CDA | |||||||||||
| Adat AS | Metrik | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Takat lebur – cecair | 1940 °F | 1060 °C | |||||||||
| Takat lebur – solidus | 1890 °F | 1032 °C | |||||||||
| Ketumpatan | 0.316 lb/in3 at 68 °F | 8.75 gm/cm3 at 20 °C | |||||||||
| Graviti tentu | 8.75 | 8.75 | |||||||||
| Kekonduksian elektrik | 12% IACS at 68 °F | 0.07 MegaSiemens/cm at 20 °C | |||||||||
| Kekonduksian terma | 33 Btu/sq ft/ft hr/°F at 68 °F | 57.1 W/m at 20 °C | |||||||||
| Pekali pengembangan haba 68-572 | 9.9 · 10-6 per °F (68-572 °F) | 17.1 · 10-6 per °C (20-300 °C) | |||||||||
| Kapasiti haba tertentu | 0.09 Btu/lb/°F pada 68 °F | 377.1 J/kg pada 20 °C | |||||||||
| Modulus keanjalan dalam tegangan | 17000 ksi | 117212 MPa | |||||||||
| Modulus ketegaran | 6400 ksi | 44127 MPa | |||||||||
Sifat fabrikasi
Hartanah fabrikasi disediakan oleh CDA | |||||||||||
| Teknik | Kesesuaian | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Memateri | Cemerlang | ||||||||||
| Memateri | Cemerlang | ||||||||||
| Kimpalan oksiasetilena | bagus | ||||||||||
| Kimpalan arka terlindung gas | Cemerlang | ||||||||||
| Kimpalan arka logam bersalut | Adil | ||||||||||
| Kimpalan titik | Cemerlang | ||||||||||
| Kimpalan jahitan | bagus | ||||||||||
| Kimpalan punggung | Cemerlang | ||||||||||
| Kapasiti untuk bekerja dengan sejuk | Cemerlang | ||||||||||
| Kapasiti untuk menjadi panas terbentuk | Cemerlang | ||||||||||
| Penilaian kebolehmesinan | 30 | ||||||||||
Sifat terma
Sifat terma yang disediakan oleh CDA *Suhu diukur dalam Fahrenheit. |
