C63000 Nickel Aluminum Bronze Product Introduction
- Komposisi: Cu: 81.0%, Al: 10.0%, Ni: 5.0%, Fe: 3.0%, Mn: 1.0%
- Sifat Mekanik: Tensile Strength: 900 MPa, Yield Strength: 550 MPa, Elongation: 15%, Hardness (Rockwell B): 80
- Performance: Excellent corrosion resistance in seawater and acidic environments, with consistent mechanical properties across temperatures.
- Aplikasi: Widely used in marine (propellers, shafts), aerospace (bushings, valves), and industrial sectors (bearings, gears).
- Shapes & Sizes: Available in rods (6 mm to 200 mm diameter), bars, plates (5 mm to 50 mm thickness), and tubes (10 mm to 150 mm OD).
- Production Standards: Conforms to ASTM B150/B150M and SAE J461 standards.
C63000 Nickel Aluminum Bronze Product Introduction
Komposisi kimia
| Elemen | Komposisi (%) |
|---|---|
| Tembaga | 81.0 |
| Aluminium (Al) | 10.0 |
| Nikel (Ni) | 5.0 |
| Besi (Fe) | 3.0 |
| Mangan (Mn) | 1.0 |
Peralatan mekanis
| Milik | Nilai |
|---|---|
| Daya tarik | 900 MPa (130 ksi) |
| Kekuatan Hasil (offset 0,2%) | 550 MPa (80 ksi) |
| Pemanjangan | 15% |
| Kekerasan (Rockwell B) | 80 |
Performa pada Suhu Berbeda
C63000 Nickel Aluminum Bronze exhibits good mechanical properties across a range of temperatures, suitable for applications in both high and low temperature environments.
Aplikasi Industri
C63000 Nickel Aluminum Bronze is widely used in:
- Marine applications: propellers, shafts, fittings.
- Aerospace: landing gear bushings, valve components.
- Industrial machinery: bearings, gears, bushings.
- Chemical processing equipment.
Bentuk dan Ukuran
C63000 Nickel Aluminum Bronze is available in various shapes and sizes, including:
- Rods: Diameter ranging from 6 mm to 200 mm.
- Batangan: Batangan persegi dan bulat dengan berbagai dimensi.
- Pelat: Ketebalan mulai dari 5 mm hingga 50 mm.
- Tubes: OD ranging from 10 mm to 150 mm.
Standar Produksi
C63000 Nickel Aluminum Bronze conforms to international standards such as:
- ASTM B150/B150M: Spesifikasi standar untuk batang, batang, dan bentuk perunggu aluminium.
- SAE J461: Paduan tembaga tempa dan tuang.
Standar dan Nilai yang Sesuai
| Negara/Wilayah | Standar | Nilai yang Sesuai |
|---|---|---|
| Amerika Serikat | ASTM B150/B150M | C63000 |
| Eropa | BS EN 12163, BS EN 12420 | CuAl10Ni5Fe4 |
| Jepang | DIA H3250 | Bab 6300 |
Pengelasan, Pemrosesan, Pemolesan
C63000 Nickel Aluminum Bronze can be welded using various methods such as gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW). It is also suitable for machining, polishing, and can be heat treated to improve its mechanical properties.
Perlakuan Panas dan Pemrosesan Dingin
C63000 Nickel Aluminum Bronze can be heat treated to improve its strength and hardness. Cold processing methods such as cold rolling and cold drawing can enhance its mechanical properties.
Keuntungan dan Kerugian
| Keuntungan | Metode pemotongan |
|---|---|
| High strength and toughness | Higher cost compared to other bronze alloys |
| Ketahanan korosi yang sangat baik | Limited availability in some regions |
| Good wear resistance | Requires expertise for welding and processing |
| Suitable for various temperatures and environments |
Produk dan Perbandingan Serupa
| Jenis/Properti Paduan | Perunggu Aluminium Nikel C63000 | Perunggu Aluminium C95400 | Perunggu Aluminium C62300 |
|---|---|---|---|
| Komposisi (%) | Cu: 81.0, Al: 10.0, Ni: 5.0 | Cu: 85.0, Al: 11.0 | Cu: 88,0, Al: 10,0 |
| Kekuatan Tarik (MPa) | 900 | 500 | 600 |
| Kekuatan Hasil (MPa) | 550 | 200 | 250 |
| Aplikasi | Kelautan, dirgantara, industri | Bantalan, roda gigi, busing | Katup, perlengkapan |
Kesimpulan
C63000 Nickel Aluminum Bronze is a versatile alloy known for its exceptional mechanical properties, corrosion resistance, and suitability for various industrial applications. Its composition and performance make it a preferred choice in marine environments, aerospace, and industrial machinery where strength, durability, and resistance to wear are critical factors.
